Optical Filters
Laser line Band pass Filters
Features:
Ultrahigh Transmission of >90%)
Excellent Blocking (OD>5.0) at ±1% of laser wavelength
Narrow Typical FWHM of 90%
Blocking:
OD>5.0 Range exceptλc±1.0%
OD>6.0 Range exceptλc±1.5%
Angle of incidence: 0.0°±2.0°
Substrate: Low Fluorescence BK7 or equivalent
Diameter: Ф12.5mm or Ф25.0mm
Diameter...
Fluorescence Band pass Filters Set
Features:
High Pass band Transmission(T>90%)
Excellent Blocking (OD>6.0)
Hard Coatings and No Adhesives for Unrivaled Filter Life
All dielectric Coated with oil-less IBS Technology
Applications:
Fluorescence microscope
Co-localization fluorescence measurements
Fluorescence in situs hybridization (FISH)
Comparative genomic hybridization...
ANPR/ALPR filter (day/night)
Key Specifications/Special Features:
ANPR/ALPR filter (day/night), also day/night strong light attenuation filter
Attenuation strong light filter coatings 850nm for ANPR/ALPR cameras
It effectively reduces glare
Used car license plates at night exposure
License plate filter can replace the day/night (IR cut off filter) mechanical...
IR Narrow Band pass Filter
The 850nm band-pass filter is used in NIR imaging system to eliminate the influence of surrounding background light, including the visible and NIR. This filter is to increase the signal/noise ratio of the imager. The applications include secure monitoring, visual telephone, visual doorbell, digital telescope and other imaging systems.
Band-pass...
UV—420 Lens
Features:
Completely blocks UV radiation into the violet region of the visible spectrum.
Counters unsharpness caused by chromatic aberrations within the UV light spectrum.
Absorbs UV light and reduces bluish cast of daylight.
Brass filter ring helps to prevent jamming and provides additional strength.
Specifications:
Size:15*28*1.1mm...
BLUE IR-CUT filter
Maximum size: 180mm ×180mm can make any Dimension
1/2" , 1/3" , 1/4"
Average transmittance area Tave: >92%
Minimum transmittance Tmin: >85%
.Rejection range: 720nm-1100nm
Rejection average transmittance Tave:...
Day/Night Filter
Day and Night filters are used in CCD or CMOS imaging system. It allows both visible and 850nm infrared LED light to pass through,but cut off the NIR region from 950nm-1100nm. This filter allows the imager to work both at day and night. The application areas concern the secure monitoring, security cameras,digital camera, visual telephone, visual...
IR-CUT-Filter
nfrared (IR) cut-off filters are used with color CCD or CMOS imagers to produce accurate color images. An IR cut-off filter blocks the transmission of the infrared while passing the visible. This can be done with two optical techniques: absorption or reflection. Absorptive filters are made with special optical glass that absorbs near infrared...